D-Link DFE-680TXD manual Verify Cable Connections

Adapter” read the explanation of the problem. This information will be helpful if you require technical support from D-Link.

Verify Cable Connections

Check to see that the computer(s) you are troubleshooting are properly connected. Each computer must be connected from its DFE-680TXD with a Category 5 cables. Examine the network cables and ensure that they have not been damaged by walking-on, rolling over chairs, or closed in doors. Additionally, make note of and alleviate any possible electromagnetic interference that may be effecting your network.

Your network cables can be plugged into any port on your hub except the “Uplink” port. The “Uplink” port is only used when connecting your hub to another hub or switch.

32