DGE-530T Gigabit Ethernet Adapter Card
10
Enter a password into the space provided and click OK to set your new password. If no password
is set by the user, the default password of “private” is used and may need to be entered to
configure the D-Link SNMP Agent.
Clicking the About tab will show the current version of the adapter and the copyright information.
SNMP is an acronym for Simple Network Management Protocol. This network protocol is used to
manage TCP/IP networks by using “Traps” sent from devices compliant with SNMP and collected
by one or more servers. Devices that comply with SNMP correspond with management
applications by sending alerts and updates, as well as allowing configuration changes.
The DGE-530T’s SNMP agent will take event notices from the adapter, translate and then forward
them to specified SNMP management stations.
Before installing the SNMP agent, you must install SNMP on your computer. Consult the
operating system documentation of your computer for additional information.
To install SNMP on the DGE–530T, simply click Install SNMP Agent on the Introduction Page and
complete the steps of the Installation Wizard.
NOTE: The default password for this utility is “private”.