D-Link DGE-530T D-Link Network Control

DGE-530T Gigabit Ethernet Adapter Card

This utility should only be used by experienced network administrators. Additional software or

services may need to be previously installed or configured prior to installation of the SNMP

protocol.

D-Link Network Control

Installed automatically with the driver is the D-Link Network Control program, which may be

opened from an icon appearing in the lower right hand taskbar of your browser, and on the

Control Panel of your computer. Double click the icon to open the program. The configuration

and settings information for this program may be found by clicking the Help button of the

current screen. This should provide you with any information you should need.

Within the D-Link Network Control program is a feature for examining the quality and the

characteristics of a network cable that has been connected to the DGE-530T. This feature, named

the Virtual Cable Tester (VCT), will make it possible for the user to detect and report potential

cabling issues such as cable opens, cable shorts and impedance mismatches. The distance of the

fault can be reported to within one meter.

To view the VCT window, simply double click the icon for the D-Link Network Control and select

the VCT folder heading at the top of the window as seen below.