D-Link DI-604 Assigning a Static IP Address, Networking Basics, Double-click on Control Panel

Models: DI-604

1 81
Download 81 pages 18.37 Kb
Page 58
Image 58
(Windows 98/ME users: winipcfg at the prompt. Address.)

Networking Basics

Checking the IP Address in Windows XP/2000

Type ipconfig /renew at the prompt to get a new IP Address. Click Enter. The new IP Address is shown below.

(Windows 98/ME users: winipcfg at the prompt. Address.)

go to Start > Run. Type Command. Type Click Release and Renew to obtain a new IP

Assigning a Static IP Address

Note: Residential Gateways/Broadband Routers will automatically assign IP Addresses to the computers on the network, using DHCP (Dynamic Host Configuration Protocol) technology. If you are using a DHCP-capable Gateway/Router you will not need to assign Static IP Addresses.

If you are not using a DHCP capable Gateway/Router, or you need to assign a Static IP Address, please follow these instructions:

Go to Start

Double-click on

Control Panel

-58-

Page 58
Image 58
D-Link DI-604 manual Assigning a Static IP Address, Networking Basics, Checking the IP Address in Windows XP/2000