Figure 2-5 Setup of LAN connections for DI-704.
2.Setup WAN connection: prepare an Ethernet cable for connecting the DI-704 to your cable/xDSL modem or Ethernet backbone. Figure 2-5 illustrates the WAN connection.
3.Power on: Connect the power cord to power inlet and turn the power switch on. The DI-704 will automatically enter the self-test phase. When in the self-test phase, the indicators M1 and M2 will be lighted ON for about 5 seconds, and then M1 and M2 will flash three times to indicate that the self-test operation has finished. Finally, the M 1 will flash continuously once per second to indicate that the DI-704 is in normal operation.
5
