D-Link DI-704P user manual Configuring the Ethernet Broadband Router, Start-up and Log

Configuring the Ethernet Broadband Router

The DI-704P provides Web based configuration. You can configure your DI-704P through your Netscape Communicator or Internet Explorer browser in MS Windows, Macintosh or UNIX based platforms.

Start-up and Log in

Activate your browser, and disable the proxy or add the IP address of the DI-704P into the exceptions . Then, type the IP address of the DI-704P into the Location (for Netscape) or Address (for IE) field and press “Enter.” For example: http://192.168.0.1.

After the connection is established, you will see the web user interface. There are two appearances of web user interface: for general users and for the system administrator.

To log in as an administrator, enter the system password (the factory setting

-14-