29
DI-LB604 User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
QoS Set Policy
Advanced > QoS > Set Policy
QoS Policy
Policy Name:
The friendly name of a policy which is used to classify the received
packets based on the following rules.
Setting the QoS policy can assign received packets a higher/lower priority (based on
your configuration) to pass through this device. You can define some policies which
classify received packets based on local/remote IP addresses, ports and protocol type.
This feature is useful when the WAN link is very busy or congested or when using
special applications that need real time services such as Internet phone, video
conference...etc.
Local/Remote
Address:
Specify a packet based on local/remote IP address. By default,
the address is 0.0.0.0 which represents all IP Addresses. Port and
Protocol Type define all packets for special applications.
Protocol Type:
This field is defined for which type of packet. It has some values
such as IP, TCP and UDP.
Source/
Destination Port:
Specify the port number ranges if TCP or UDP protocol is
selected.
Priority Queue:
This device supports four queues. When a packet meets a policy
rule requirement, it will be put into the responding queue. Otherwise
it is assigned the lowest priority to pass through.