D-Link DMP-CD100 user manual Advanced Playing Modes, Intro Play Intro, Program Play Pgm

running out of lines in the tank.

4.In case of excessive vibration, the memory data may be exhausted and the Electronic Shock Protection (ESP) may become temporarily ineffective.

NOTE: The battery power consumes more quickly when the Electronic Shock Protection control is used. It is therefore recommended to set the ESP control off when the DMP-CD100 is used in a place free of vibration.

ADVANCED PLAYING MODES

INTRO PLAY (INTRO)

1.Press the STOP button until the total track number and total plays time appears on the display.

2.Press the REPEAT/MODE button until the Intro Indicator (INTRO) flash on the display.

3.Press the PLAY / PAUSE button to start playing the Intro mode.

4.The disc will then begin playing the first ten seconds of all tracks once and then stops automatically.

PROGRAM PLAY (PGM)

1.Press the PROGRAM button until you see the Program Indicator (PGM) flashing on the display.

2.Press the FORWARD OR REVERSE SKIP / SEARCH button to select the desired track number.

3.Press the PROGRAM button to store the track number into that memory location. The next memory location will flash on the display.

4.Repeat Steps 2 and 3 to store up to 22 tracks.

5.Press the PLAY / PAUSE button to start the program play.

6.When the last programmed track has finished playing, the DMP-CD100 will stop automatically.

TO VIEW THE PROGRAMMED CONTENTS

8