D-Link manual Information you will need about your DSL-320T Adsl Modem

DSL-320T ADSL Modem User Guide

Information you will need about your DSL-320T ADSL Modem:

	This is the Username needed access the Modem’s	Record info here
	management interface. When you attempt to connect
Username	to the device through a web browser you will be
	prompted to enter this Username. The default
	Username for the Modem is admin. The user cannot
	change this.
	This is the Password you will be prompted to enter
Password	when you access the Modem’s management interface.
	The default Password is admin. The user may change
	this.
	This is the IP address you will enter into the Address
	field of your web browser to access the Modem’s
LAN IP addresses for	configuration graphical user interface (GUI) using a
	web browser. The default IP address is 192.168.1.1.
the DSL-320T	This may be changed to suit any IP address scheme
	the user desires. This address will be the base IP
	address used for DHCP service on the LAN when DHCP
	is enabled.
LAN Subnet Mask for	This is the subnet mask used by the DSL-320T, and will
	be used throughout your LAN. The default subnet mask
the DSL-320T
	is 255.255.255.0. This can be changed later.

Information you will need about your LAN or computer:

	If your computer has an Ethernet NIC, you can	Record info here
Ethernet NIC	connect the DSL-320T to this Ethernet port using an
	Ethernet cable. You can also use the Ethernet ports
	on the DSL-320T to connect to other computer or
	Ethernet devices.
	Your DSL-320T ADSL Modem is configured, by
	default, to be a DHCP server. This means that it can
	assign an IP address, subnet mask, and a default
DHCP Client status	gateway address to computers on your LAN. The
	default range of IP addresses the DSL-320T will
	assign are from 192.168.1.2 to 192.168.1.254.
	Your computer (or computers) needs to be configured
	to Obtain an IP address automatically (that is,
	they need to be configured as DHCP clients.)

It is recommended that your collect and record this information here, or in some other secure place, in case you have to re-configure your ADSL connection in the future.

Once you have the above information, you are ready to setup and configure your DSL-320T ADSL Modem.

ix