DSL-504 ADSL Router Userโs Guide
19
The IP over ATM connection method uses a different method to connect to the WAN. S ome IPoA connections
operate in a way similar to peer-to-peer connections, and therefore do not require a global IP address for the
WAN interface. Some networks using IPoA do require global IP settings. In this case the settings are assigned
manually or by DHCP. T he default configuration for IPoA is peer-to-peer connection, that is, global IP settings
are not required.
Router with IPoA Configuration
Follow these steps to configure an IPoA connection:
1 Choose one of the following options:
2 Click OK to save a restart. You will be able to use the Router upon restarting.
๎ For peer-to-peer network connections, check the IP Unnumbered
box (checked by default) i f it is
not already selected.
๎ For DHCP service, check the DHCP client box to select it.
๎ To assign the global IP settings manually, type in the IP Address, Subnet Mask and De
fault
Gateway IP settings given assigned by your network service provider.