DSL-504 ADSL Router User’s Guide
23
WAN Connection
It may be necessary to change the connection profile used by the Router. You can change this to one of the pre-
configured profiles by following the instructions in section titles Changing the Co nnection Profile on page 17 in
the previous chapter. If you must create a new connection profile or change the VCI/VPI combination of a n
existing profile, skip ahead to Creating a New Connection Profile on page 25.
Figure 4- 1. WAN Configuration
The table below summarizes t he configuration options for t he different types of Router connection profiles. For
step-by-step instructions on establishing the WAN connection to your service provider’ s network and the
Internet, read the previous chapter.
If you are using the DSL-504 as a bridge device (Bridge with RFC 1483 Connection Profile), the options
available are more limited. In addition, any computer connected to the device will need to obtain IP settings. Ask
your service provider for information on how to set up computers using the DSL-504 as a bridge.