D-Link DVG-G1402S manual Private IP, Protocol Type, Start/End Global Port, Start/End Local Port

and set the Status fields to Enabled by clicking the radio button. To configure other virtual servers for the Router, configure the following fields and click Apply.

Index	This is an index number used to identify the Virtual Server
	entry.
Private IP	Enter the IP address of the Virtual Server.
Protocol Type	The protocol type used for the Virtual Server. The user may
	select TCP, UDP or Both, depending on the type of Virtual
	Server implemented.
Start/End Global Port	Enter a range of ports on the device on the WAN side of the
	network that will be accessing the Virtual Server currently being
	configured. Commonly, this range of ports is identical to the
	local range of ports. Existing Virtual Servers may already have
	their well-known port ranges listed but this may need to be
	changed in certain circumstances.
Start/End Local Port	Enter the range of ports of the Virtual Server’s computer.
	Existing Virtual Servers may already have their well-known port
	ranges listed but this may need to be changed in certain
	circumstances.

41