Configuration Utility
Link Info
After clicking on the Configuration Utility icon, the Link Info screen will display the following:
Status: Displays the MAC Address of the Access Point that is associated with the
SSID: The Service Set Identifier is the name assigned to the wireless network. The factory SSID setting is set to default.
Frequency: Display the frequency of the Access Point that is associated with the
Wireless Mode: Display wireless mode using infrastructure or
Encryption: Display the encryption with the connected wireless device is enable or disable.
TxRate: The factory setting is set to 11 Mbps; however, TxRate settings are automatically determined by the
Channel: Displays the channel information. By default, the channel is set to 6 and selection is automatically determined by the
Signal Strength: Displays the Signal Strength represents the wireless signal between the access point and the
Packet Count: Displays the statistics of data transmitted and received.
14
