Power Receptor
Connections
Ethernet Port – this RJ-45 Auto MDI/MDIX port provides connection to a network device using a Cat 5 Ethernet cable. (The auto MDI/MDIX port accommodates either Straight- Through or Cross-Over cable and is auto-sensing.)
Reset Button
Ethernet Port
Reset Button – press this button to revert to the factory default settings of the DWL-810+
Power Receptor – connect one end of the 5V DC Power Adapter (included) to the power receptor on the DWL-810+ and connect the other end of the Power Adapter to a power outlet.
Category 5 is the most reliable grade of twisted-pair cable. It is available as either Straight-Throughcable or Cross-Overcable. Always check your installation instructions to make sure that you have selected the correct type of Category 5 cable for your other networking devices. The DWL-810+ will accept either kind of cable and will automatically sense the cable that you are using.
Default Settings
Operating Mode | Infrastructure |
| |
SSID | default |
| |
Channel | 6 |
| |
Transmission rates | Auto |
| |
Encryption | Disabled |
| |
IP Address | 192.168.0.30 |
| |
IP Subnet | 255.255.255.0 |
| |
User Name | admin (all lower case) |
| |
Password | None (leave field blank) |
| |
