
Using the Configuration Utility | ||
|
|
|
Site Survey - Profile Configuration
When you click Add, Properties or Connect in the Site Survey or Encryption screen, this popup screen appears for configuration purposes.
Profile Name:
SSID:
Wireless Mode:
Channel:
Tx Rate:
Power Mode:
Enter a name for the network profile here.
The Service Set Identifier is the name assigned to the wireless network. The factory SSID setting is default.
Either Infrastructure or
The channel selection is automatically determined by the
The default setting is Auto. These settings are automatically determined for the maximum wireless signal rate.
Continuous Access Mode is the default setting. For best results leave this setting at the default.
18 |