D-Link N 150 user manual Quick Install Guide, Start Here, Manual Setup, Package Contents, Modem

Quick Install Guide

Wireless N 150 Home Cloud Router

Package Contents

DIR-600L Wireless N 150 Home

Cloud Router

Power Adapter

Ethernet Cable

If any of the above items are missing, please contact your reseller.

Note: Please go to http://www.dlink.com/support/ to download the user manual.

DIR-600L

LEDs (from top to bottom)

Power LED - A solid light indicates a proper connection to the power supply.

Internet LED - A solid light indicates connection on the Internet port. This LED blinks during data transmission.

WAN LEDs - A solid light indicates that the wireless segment is ready. This LED blinks during wireless data transmission.

LAN LEDs (1-4)A solid light indicates a connection to an Ethernet-enabled device on ports 1-4. This LED blinks during data transmission.

WPS LED/Button - Located on the side of the router. Press to initiate the WPS process. The LED will blink during the WPS configuration process.

Start Here

To configure your router, go to the Manual Setup Section below and follow the steps.

Important for Manual Setup: For the quick setup wizard to work properly, you must have a working Internet connection. Ensure that you are able to use your computer to get on the Internet before disconnecting your computer from your modem.

Tips for PPPoE and USB connections:

If you have DSL and are connecting via PPPoE, make sure that you disable or uninstall any PPPoE software such as WinPoet, Broadjump, or Enternet 300 from your computer or you will not be able to connect to the Internet.

You can only use the Ethernet port on your modem. If you were using USB to connect before, then you must turn off your modem, disconnect the USB cable and connect an Ethernet cable to the Internet porton the router, then turn the modem back on. In some cases, you may need to call your ISP to change connection types (USB to Ethernet).

mydlink Setup

After creating a mydlink account, go to www.mydlink.com to configure and manage your devices.

Manual Setup

1	2			3			4
Modem			Modem
					Router		Computer
				Computer
		Router
					5V	1A	RESET
	4	3 LAN 21INTERNET 5V 1A	RESET

Router

Modem

Turn off and unplug your cable or DSL broadband modem.

Position your router close to your modem and a computer. Place the router in an open area of your intended work area for better wireless coverage.

If you are currently using a router, disconnect all the cables connected to it before installing the DIR-605L. Unplug the Ethernet cable from your modem that is connected to your computer. Plug it into the LAN port labeled 1 on the back of your router. The router is now connected to your computer.

Plug one end of the included blue Ethernet cable that came with your router into the yellow port labeled INTERNET on the back of the router. Plug the other end of this cable into the Ethernet port on your modem.

5	6	7	8
	Modem		Computer

Router

Computer

Router

Modem

Modem

Reconnect the power adapter to your cable or DSL broadband modem and wait for two minutes.

Plug the power back into the modem and power it on. Then connect the supplied power adapter into the power receptor on the back of the router and then plug into a power outlet or surge protector. Verify the power light is lit.

From the computer you connected the router to, open a web browser and enter http://192.168.0.1 or http://dlinkrouter. Press Enter and you will be directed to the D-Link Setup Wizard page, which will detect your Internet connection type. Follow the on-screen instructions to configure your Internet settings. After setting up your router, you will be given the option to create a mydlink account. Go to www. mydlink.com and enter your acount information.

This is a sample network configuration of the setup after you have completed all the setup steps.

Note: Please refer to the user manual for more detailed installation information and advanced features.

Technical Support

If you experience issues registering this Router with your mydlink account, try performing a hard reset by using an unfolded paperclip to press and hold the reset button for 10 seconds while the Router is powered on. This may be necessary if you have purchased an open box or resold unit.

U.S. and Canadian customers can contact D-Link technical support through our web site or by phone. You can find software updates and user documentation on the D-Link website as well as frequently asked questions and answers to technical issues.

Before you contact technical support, please have the following ready:

•Model number of the product (e.g. DIR-600L)

•Hardware Revision (located on the label on the bottom of the product (e.g. rev A1))

•Serial Number (s/n number located on the label on the bottom of the product).

United States

Internet: http://support.dlink.com

Canada

Internet: http://support.dlink.ca

©2012 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link Corporation or its subsidiaries in the United States and/or other countries. Other trademarks or registered trademarks are the property of their respective owners. Maximum wireless signal rate derived from IEEE Standard 802.11g and 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely affect wireless signal range. Product specifications, size and shape are subject to change without notice, and actual product appearance may differ from that depicted on the package. Visit dlink.com (US) or dlink.ca (Canada) for more details. iPhone, iPad, and iPod touch are registered trademarks of Apple Inc.

Version 1.0 (May 3, 2012)