Dacor installation instructions For DACOR Built-in Kit Model AOCTK27 or AOCTK30

INSTALLATION INSTRUCTIONS

For DACOR Built-in Kit Model AOCTK27 or AOCTK30

THIS KIT IS UL APPROVED TO ALLOW CERTAIN MICROWAVE OVENS TO BE INSTALLED ABOVE CERTAIN CONVENTIONAL/CONVECTION WALL OVENS. PLEASE SEE THE OPERATION MANUAL REGARDING BUILT-IN APPLICATIONS.

IF YOUR LOWER CONVENTIONAL OVEN IS NOT LISTED IN THE OPERATION MANUAL OR THE INSTALLATION INSTRUCTIONS OF THE MICROWAVE OVEN AS AN APPROVED MAKE AND MODEL, THEN DO NOT INSTALL THE MICROWAVE OVEN IN ANY AREA WHERE HEAT AND STEAM ARE GENERATED; FOR EXAMPLE, NEXT TO OR ABOVE A CONVENTIONAL RANGE OR ABOVE A CONVENTIONAL WALL OVEN.

Microwave Oven: DCM24

Lower Oven: EO127, EO130, MOV127, MOH127, MOV130, MOH130, PO127, PO130

Do not build-in above any other gas or electric wall oven.

PLEASE READ THESE INSTRUCTIONS THOROUGHLY BEFORE BEGINNING INSTALLATION!

•Be sure to DISCONNECT THE PLUG of the microwave oven from the electrical outlet before installing the Built-in Kit. Remove the turntable from the oven cavity.

•Because the kit includes metal parts, due caution should be used in handling and installation to avoid the possibility of injury.

•Do not remove permanently affi xed labels, warnings or plates from the product. This may void the warranty.

•Please observe all local and national codes and ordinances.

•The installer should leave these instructions with the consumer who should retain for local inspector’s use and for future reference.

PARTS INCLUDED IN THE KIT

1 FRONT FRAME	6 DUCT-A1: QTY 1
ASSEMBLY: QTY 1
	7 DUCT-A2: QTY 1

2BOTTOM DUCT:

QTY 1		8 DUCT-A3: QTY 1
3 SCREW-A (1/2"		9 DUCT-B: QTY 1
LENGTH): QTY	10
4 SCREW-B (1 3 /4 "		! DUCT-C: QTY 1
LENGTH): QTY	4

5SCREW-C (1 3 /16 " LENGTH): QTY 2

CORD BOX: QTY 1

1