Dacor dct3655 Burner and Grate Assembly, SimmerSear Burner, Standard Burners, Grates

Setting Up Your Cooktop

Burner and Grate Assembly

wARNING

Never attempt to operate the cooktop with any of the burner parts removed. Assemble the burners and grates only when the cooktop is cool.

SimmerSear Burner

1.Install the SimmerSear burner ring on the Sim- erSear burner base (located on the center of the cooktop). Line up the indentations on the bottom of the burner ring with the pins on top of the burner base.

2.Set the outer SimmerSear burner cap on top of the burner ring. Make sure it is centered on top.

3.Set the inner SimmerSear burner cap on the center of the burner base. Line up the ridge on the bottom of the cap with the pins on the center of the burner base.

Standard Burners

1.Install the standard burner rings on the standard burner bases (match sizes). Put the holes on the edge of each ring over the igniter. Center the tabs on the bottom of each ring in the hole in the center of each base.

2.Install all the standard burner caps. The ridge on the bottom of each cap must surround the top of each ring.

Ridge on bottom Inner burner cap

STEP 3

Outer burner cap

STEP 2

Burner ring

STEP 1

Pin on burner base

SimmerSear Burner Assembly

(Center Burner)

Grates

Gently set the grates on top of the spill tray. Put the legs of each grate into the corresponding dimples.

IMPORTANT: Each grate is different. Orient them as shown. Each grate has a slot on the bottom that matches up with a notch on the spill tray. The slots on the grates all go toward the back of the cooktop.