Cleaning and Maintenance
Maintenance
LIGHT BULB REPLACEMENT
warning
•To prevent electric shock turn off the main power switch.
•To avoid personal injury, make sure the cooktop or range, the hood and the light bulb are cool before changing the light bulb.
Light bulb replacement is considered to be a homeowner maintenance operation. If all of the lights do not work, before replacing any bulbs, check to make sure that the main circuit breaker (or fuse) and the main power switch on the hood are on.
Replace the light bulbs only with Dacor Part No. 101944, available from any authorized Dacor parts dealer.
IMPORTANT:
•Do not touch the replacement halogen light bulbs with your fingers. Halogen bulbs are sensitive to the oils from your hand. The oils from your hand will stick to the bulb and cause it to burn out faster than normal.
•Do not pry out the entire light fixture A , when replacing the light bulb. It is difficult to reinstall. Pry out only the the lens retaining ring B , which is the inner metal ring attached to the light fixture.
A
B
3.Once the lens retaining ring and lens are removed, pull the old bulb C sideways, out of the socket.
4.Using a glove, insert the new bulb into the socket. Line up the prongs on the new light blub with the holes in the light socket. Gently push in on the new bulb until it stops.
A
C
D
B
5.Center the lens D on the lens retaining ring B and snap it back into place on the light fixture A .
6.Turn on the main power switch. Touch the light key to make sure it is working.
REPLACEMENT PARTS
DACOR PART # | DESCRIPTION |
101944 Light bulb
101952 Filter
1.Turn off the main power switch. See page 3 for the location.
2.Hold the lens retaining ring B and lens in place with one hand while prying the edge of the ring loose with a small screwdriver or plastic knife. If you use a screwdriver, cover the end with tape to prevent scratching.
6