Dacor Problem Solution Guide

Before You Call For Service

Problem Solution Guide

PROBLEM	MAY BE CAUSED BY	WHAT TO DO
Nothing Works. Control panel is not lit.	Power to hood is off.	Turn on power at junction or fuse box.
Blower system does not work.		Check for tripped breaker or blown
		fuse.
	Hood main power switch is off.	Make sure hood main power switch is
		on (see page 3).
	Power outage.	Call electric company.
	Hood not connected to electric power.	Have qualified electrician connect
		hood to electric power.
Lights do not work. Control panel is not	See Nothing Works above.
lit.
Light does not work. Control panel is lit.	Loose light bulb.	Check to make sure that both prongs
		on the light bulb are inserted into the
		holes on the light socket (see
		page 6).
	Light bulb burned out.	Replace light bulb (see page 6).
Blower system does not draw heat and	Blower set to low setting.	See Operating Instructions section.
smoke properly.	Filter(s) clogged or dirty.	Check filters. Make sure they are
		completely clean and not blocked by
		foreign objects.
	Damper jammed shut or duct work	Consult with a qualified installation
	clogged.	professional.*
Blower shuts off by itself after being left	Normal operation.	To conserve energy, the blower
on for a long time.		automatically turns itself off if it is left
		on for four hours continuously.
Blower system does not work. Control	See Nothing Works above.
panel not lit.
Blower system does not work. Control	Blower system malfunction.	Call for service.
panel lit.

*The duct work connected from the range hood chimney to outside the house or building required to vent heat and smoke is not manufactured, warranted or serviced by Dacor. The customer is responsible for having a qualified installer install and maintain the duct work.

7