Dacor DR30GFS, DR30GIFS, DR30GIS 10” min. (25.4 cm), to any combustibles, Rear wall or, 3/4” min. (1.9 cm), rear wall required, above counter both sides, max, (65.1 cm), 20 3/4” (53.3 cm), cm)

DR30GS, DR30GFS, DR30GIS, DR30GIFS

Document # PG05-007		Revised 04/04/13 Page 3/5
	Distinctive 30” Wide	PLANNING
	All Gas Ranges	GUIDE

Self-Rimming Installation, custom Cutout Options (Models DR30GIS and DR30GIFS Only)

NOTE: The diagrams below are for installations that require custom cutouts. See page 5/5 for installation in standard 30 inch wide cutout.

All tolerances +1/16” (+1.6 mm), -0 unless otherwise noted.

For all self-rimming installations:

Countertop height: 34 3/4” (88.3 cm) min. 36 7/8” (93.7 cm) max.

Countertop thickness: 1 5/8” (4.1 cm) max.

10” min. (25.4 cm)	Non-combustible	10” min. (25.4 cm)	1
to any combustibles		to any combustibles	Rear wall or		3/4” min. (1.9 cm)
	rear wall required 1		countertop edge
				countertop overhang
above counter both sides		above counter both sides

255/8”

max.

(65.1 cm)

29 1/4” (74.3 cm) countertop opening

30” (76.2 cm) cabinet opening 3 below countertop

Notch countertop to width of cabinets

Cabinet face

below countertop

21”

20 3/4” (53.3 cm)

(52.7 cm) to 24”

(61.0 cm)

	25 3/4”
					29 1/4” (74.3 cm)
(65.4 cm)				countertop opening
		max.				30” (76.2 cm)
						cabinet opening	3
						below countertop
					Notch countertop
			t		o width of cabinets
						Cabinet face
Countertop front				below countertop

21 1/8”

20 7/8” (53.7 cm)

(53.0 cm) to

24 1/8”

(61.3 cm)

Cabinets Less Than 24” Deep, 3 1/4” Side Panels Installed, Range Back Flush to Wall (Top View)

10” min. (25.4 cm)	Non-combustible
to any combustibles
	rear wall required 1
above counter both sides

Cabinet Depth Greater Than 24” 2

3 1/4” Side Panels Installed, Range Back

Overhanging Countertop (Top View)

10” min. (25.4 cm)	1
	Rear wall or	1” min. (2.5 cm)
to any combustibles
	countertop edge
above counter both sides		Countertop overhang

	29 1/4” (74.3 cm)
	countertop opening							24”
			30” (76.2 cm)				(61.0		cm)
		cabinet opening		3
		below countertop
			Cabinet face
	below countertop
	Notch countertop
overhang to width					of
			cabinets			Countertop overhang

1 5/8” (4.1 cm) max.

Cabinet Exactly 24” Deep, 3 1/4” Side Panels Removed, Range Back Flush to Wall (Top View)

		29 1/4” (74.3 cm)					24	1/8”
	countertop opening
				30” (76.2 cm)			(61.3	cm)
			cabinet opening		3
			below countertop
				Cabinet face
		below countertop
		Notch countertop
o		verhang to width of
				cabinets		Countertop overhang

1 5/8” (4.1 cm) max.

Cabinet Depth Greater Than 25 1/8” 2 3 1/4” Side Panels Removed, Range Back Overhanging Countertop (Top View)

1On models DR30GIS and DR30GIS, non-combustible surface required immediately behind range, as specified on previous page, when back of backguard is less than 2 1/2” (6.4 cm) from rear wall.

2Models DR30GIS and DR30GIS include self-rimming trim piece that attaches to back of range and covers the edge of the countertop overhang in back.

3To create a “built-in look” on the front of the cabinet, this dimension may be changed to 29 1/4” (74.3 cm). This configuration is only for models DR30GIS and DR30GIS with side panels behind door removed.

All specifications subject to change without notice. www.dacor.com Phone: (800) 793-0093