DR30GS, DR30GFS, DR30GIS, DR30GIFS

Document # PG05-007

Revised 04/04/13 Page 5/5

 

Distinctive 30” Wide

PLANNING

 

All Gas Ranges

GUIDE

Self-Rimming Installation, Standard Cutout Requirements (Models DR30GIS and DR30GIFS Only)

10” min. (25.4 cm)

Non-combustible

to any combustibles

rear wall required

above counter both sides

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

24 3/8”

min.30” (76.2 cm)

(61.9 cm) countertop/cabinet opening

Cabinet face

below countertop

Countertop front

standard width CUTOUT FOR model dr30dI[F]S self-rimming TRIM KIT atkdr30Gw required

Electrical Specifications/Dimensions, All Models

cm)

 

 

cm)

 

 

 

 

 

 

 

 

 

 

 

(25.4

 

(25.4

 

 

 

 

 

12 1/4”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

10”

 

 

 

 

10”

 

(31.1 cm)

 

 

 

 

 

 

 

 

 

 

to

 

 

 

 

 

 

 

 

 

 

 

 

14 1/4”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(36.2 cm)

 

 

 

 

 

 

 

 

 

 

 

 

12” (30.5 cm)

2 1/2”

 

(6.4 cm)

1” (2.5 cm)

3 1/2”

4 1/4”

(8.9 cm)

(10.8 cm)

6’ (183 cm) long

utility clearance behind range

ELECTRICAL REQUIREMENTS

Electrical Circuit

Total Connected

Required

Load

120 Vac, 60 Hz, 15 Amps.,

4.0 Amps. @

dedicated, grounded

120 Vac, 60 Hz

back of range

GAS SUPPLY PRESSURE REQUIREMENTS

Gas

Manifold

Min. Gas Supply

Max. Input

Type

Pressure* (WC)

Pressure (WC)

Pressure

Natural

5”

6”

1/2 psi

LP

10”

11”

1/2 psi

IMPORTANT: The information above is for reference only. If the above data does not agree with the product data label, use the data on the product data label.

The gas inlet on the regulator accommodates a 1/2” NPT gas line connection. The range can also accommodate a 3/4” NPT gas line connection by removing the 1/2” to 3/4” adapter on the regulator inlet.

All specifications subject to change without notice.

www.dacor.com

Phone: (800) 793-0093