Refrigerator Handle Kit Installation Instructions
STEP 2: Reinstall the the screws and studs removed in step 1, inserting the provided plastic wash- ers between the base of the studs and the refrigerator doors as shown.
Model EF36RNFSS
shown
Plastic Washer
Screw Mounting Stud
Handle Mounting
Stud Locations
Bottom (Freezer) Handle Installation
STEP 3: Find the smallest of the two handles in the kit box.
STEP 4: Mount the handle to the bottom drawer by sliding the holes on the back over the handle mounting studs on the refrigerator. Make sure the set screw holes on the handle are facing toward the bottom. You may need to loosen the set screws using a 3/32” Allen wrench to allow the handle to slide into place.
STEP 5: Carefully tighten the set screws into place us- ing the 3/32” Allen wrench. Be careful not to scratch the finish.
STEP 6: Check to make sure the handle is firmly attached.
Handle Mounting
Studs
Set Screw Holes
Page 2
