Refrigerator Handle Kit Installation Instructions
Top Handle Installation
STEP 7: Mount the handle to the top door by sliding the holes on the back over the handle mounting studs on the right door. Make sure the set screw holes face away from the center of the refrigerator. Loosen
the set screws if necessary to al- Set Screw Holes
low the handle to slide into place.
STEP 8: Carefully tighten the set screws into place using the 3/32” Allen wrench. Be careful not to scratch the finish.
STEP 9: Check to make sure the handle is firmly attached.
NOTE: Refrigerator with right door swing shown. On models with hinges on left, mount the handle to the opposite side.
Handle Mounting
Studs
Page 3
