Care and Cleaning
Replacing the Light Bulbs
warning
•To prevent electrical shock and/or personal injury, make certain that the oven and light bulb(s) are cool and that power to the oven has been turned off at the main power supply before replacing the light bulb(s).
•Always make sure the lens covers are in place when using the oven(s). The lens covers protect the light bulbs from breakage caused by high oven temperatures or mechanical shock.
•Use the pry stick with caution. Do not cause uneven stress on the lens cover.
•Replacing the lens cover without lining up the
Light bulb replacement is considered to be a homeowner maintenance operation. If the lights do not work, before replacing them, please consult the Problem Solution Guide on page 29.
To replace the light bulbs, follow these steps:
1.Turn off power to the oven at the circuit breaker or fuse box.
2.Gently insert the pointed end of the supplied lens pry stick under the center edge of the lens cover. Hold your hand under the lens for support and pry it loose. Pull the lens cover straight out.
important
Do not touch the replacement halogen light bulbs with your fingers. Halogen bulbs are sensitive to the oils from your hand. The oils from your hand will stick to the bulb and cause it to burn out faster than normal.
4.When reinstalling the lens, line up the
Light
bulb
Light socket
Cutout on inside rim of lens
5.Turn the power to the oven back on at the main power supply.
6.Reset the clock (see page 8.)
3.Using a glove, insert the new bulb into the socket. Replace the light bulbs only with Dacor Part No. 100429, available from any authorized Dacor parts dealer.
27