Installation Instructions

Installing the Exhaust Grill

With the oven secured to the cabinet, install the exhaust grill by mounting it to the oven with the two (2) provided screws.

Reinstalling the Oven Doors

warning

Failure to fully rotate the hinge catches will result in a safety hazard and may cause personal injury due to the door falling off its hinges. Also damage to the oven and/or improper door alignment may occur.

caution

On double ovens, install the top door first to reduce the chance of damaging the lower door during installation.

NOTE: To re-install the oven door on model EORS136, see page 14.

1.Grasp the oven door on opposite sides and lift it until the door hinges are aligned with the openings in the oven frame.

2.Holding the door at about a 30˚ angle from the horizon- tal, slide the hinges into the openings until the bottom hinge arms drop fully into the hinge receptacles.

Insert door at 30° angle

30º

3.Lower the door to the fully opened position. Rotate both hinge catches toward the oven. Open and close the door slowly and completely to ensure that it is properly

installed.

Catch

13