Oven is set for Delay Timed Cleaning

Oven will turn on automatically at preset time. If

 

desired, press “CANCEL•SECURE” touch pad

 

to cancel out of Delay Timed Cleaning

Oven will not work.

Light bulb is burned out.

Door will not open.

Oven is in Self-Clean mode.

Oven will not heat after Self-Clean.

Time of day is not set dure to power failure.

 

Oven settings are not correct.

 

Oven is set for Delayed Time mode.

Follow REPLACING THE OVEN LIGHT.

If oven is hot, door latch will release automatically when oven temperature falls below 390˚F at end of cycle.

If Self-Clean was just selected and the oven is still cool, press “CANCEL•SECURE” to turn off Self-Clean. The door will open in about 30 seconds.

Press “CLOCK” touch pad, then press “TIME•TEMP” pad to set correct time of day.

Follow mode selection and clock settings as specified in OVEN OPERATION.

Oven will turn on automatically at present time. If desired, press “CANCEL•SECURE” button to cancel out of Delay Timed mode.

Ignitors do not spark.

Sparking but no flame ignition.

Burners ignite but flame is extremely large, distorted or yellow.

Burner flame goes out at low setting.

Ignitors spark continuously after flame ignition.

Circuit breaker is tripped.

House fuse is blown.

Power outage in local area.

Gas shut-off valve is in “off” position. Gas supply is interrupted.

Burner ring ports are clogged.

Burner ports or burner caps are not positioned properly.

Cooktop is being operated on the wrong type of gas.

Regulator is not installed, is faulty or is set for the wrong type of gas.

Low gas supply pressure.

Air intake holes around knobs are obstructed. Power supply is not grounded.

Power supply polarity is reversed.

Ignitors are wet or dirty.

Reset circuit breaker.

Replace house fuse.

Contact power company.

Turn shut-off valve to “on” position.

Contact gas company.

Clean burner ring ports with straightened paper clip, needle or wire.

Remove and carefully re-install burner rings and caps.

Ensure that the type of cooktop matches the gas supply (natural gas or L.P. gas).

Check installation, replace regulator, or set regulator for proper gas.

Contact gas company.

Remove obstruction.

Have power supply properly grounded.

Have polarity corrected.

Dry or clean ignitors.

 

Troubleshooting Guide (Continued)

 

 

Clock Display

Cause

F0

Touch pad is stuck in a depressed position.

 

 

F1

Relay circuit failure.

F2

Oven temperature exceeded the clean runaway temperature (Self-Clean mode only) or the cooking runaway temperature (cooking

 

modes only).

F3

Short circuit in the oven temperature sensor.

 

 

F4

Open circuit in the oven temperature sensor.

F6

Failure in the EEPROM check comparison. (Only time of day and timer will operate.)

 

 

F7

Failure of the Self-Clean automatic door latch circuit.

 

 

F8

Failure of the door latch motor.

 

 

 

Oven Failure Codes

13

Page 15
Image 15
Dacor EpicureTM manual Clock Display Cause

EpicureTM specifications

Dacor Epicure is a premium line of kitchen appliances that marries sophisticated design with advanced technology, making it a favorite among culinary enthusiasts and home chefs alike. Known for its commitment to craftsmanship and performance, Dacor Epicure offers a suite of appliances ranging from ovens to cooktops, refrigerators, and dishwashers, each designed to elevate the cooking experience.

One of the standout features of Dacor Epicure is its state-of-the-art convection cooking technology, which ensures even heat distribution for perfectly cooked meals. The ovens utilize advanced dual-fan systems that circulate hot air, allowing for precise cooking results and significantly reducing cooking times. This feature is particularly beneficial for baking, as it promotes consistent temperatures and prevents hot spots that can lead to uneven baking.

Another hallmark of the Epicure line is its sleek, modern design. The appliances are crafted from high-quality materials like stainless steel, which not only adds a touch of elegance to any kitchen but also ensures durability. The bold front controls and high-resolution displays offer intuitive operation, allowing users to easily access settings and features.

Dacor Epicure appliances also integrate smart technology, enabling users to control their cooking environment remotely. With the Dacor iQ Kitchen App, chefs can monitor their cooking timers, adjust settings, and even receive notifications directly on their smartphones. This level of connectivity enhances convenience, making it easier to manage multiple cooking tasks.

Moreover, Dacor emphasizes the importance of precise temperature control in its cooktops. The powerful burners feature dual-flame technology that allows for quick simmering as well as high-heat searing, catering to a variety of cooking styles and recipes. The griddle option is perfect for breakfast favorites, providing a flat cooking surface that delivers consistent results.

In terms of energy efficiency, Dacor Epicure appliances are designed with sustainability in mind. Many of the products adhere to strict energy-saving standards, helping to reduce utility bills without sacrificing performance.

Overall, Dacor Epicure stands out not only for its luxurious aesthetics but also for its innovative features and commitment to quality. It provides a premier culinary experience for those who value performance, style, and functionality in their kitchen appliances. Each piece is designed to inspire creativity and elevate the art of cooking, making Dacor Epicure a superior choice for discerning home chefs.