Dacor ETT304-1 manual Operating the Element Controls Continued, Models MET304 and METB365-1

CANCEL • SECURE

Cooktop Operation

Operating the Element Controls (Continued)

Models MET304 and METB365-1

IMPORTANT: When power to the cooktop is turned on after being interrupted, the cooktop controls take a few seconds to come on. For safety, the cooktop controls come on in locked mode. See Locking and Unlocking the Cooktop Controls to unlock the controls.

• Each element has it’s own ON/OFF key. The shaded part of the diagram on each ON/OFF key indicates the element it controls.

• To turn an element on, press lightly on the ON/ ON/OFF

OFF key for the desired element, then press one of the corresponding number keys on the Electric Glide™ control to select the heat level. The element will come on at the setting selected as indicated by the light bar above the Electric Glide control. Slide your finger back and forth along the numbers on the Electric Glide control to change the heat level.

•To activate the outer element on the dual element, first activate the inner element. Press the ON/OFF key for the left front element and press a number setting. Activate the outer element by pressing the outer element key (the circle) on the right side of the element controls. Adjust the heat level for the dual element with the Electric Glide control. The outer heating element cannot be operated alone.

•To turn the bridge element on, turn on the right front and right rear elements at the desired heat levels. Press the bridge element key, located on the right side of the bottom element control. The bridge element will come on

at the same heat setting as the right front element. The bridge element heat setting is controlled in combination with the right front element using it’s Electric Glide control.

NOTE: See the Accessories section to order the optional Dacor AMG11 griddle. It fits perfectly across the three elements on the right side of the cooktop.

•To turn an element off, press the ON/OFF key for the that element. To turn off all elements at once press the CANCEL • SECURE key rapidly two times.

• The residual heat indicators will remain lit until the corresponding elements are safe to touch.

Locking and Unlocking the Cooktop Controls

To avoid accidentally turning on an element or to make it more difficult for children to operate, activate the cooktop lock feature.

•To make the cooktop controls

non-operational, press and hold the CANCEL • SECURE key for approximately three seconds. The cooktop will beep three times and the element keys will stop working.

The light behind the CANCEL • SECURE key will come on indicating that the controls are locked.

•To re-activate the controls, push and hold the

CANCEL • SECURE key again for three seconds. Three beeps will sound and the CANCEL • SECURE indicator light will go out when the controls are unlocked.

			Electric Glide
			heat control						Residual heat
ON/OFF keys				keys					indicator lights
1	2	3	4	5	6	7	8	9	10
ON/OFF
1	2	3	4	5	6	7	8	9	10
ON/OFF
1	2	3	4	5	6	7	8	9	10
ON/OFF
1	2	3	4	5	6	7	8	9	10
ON/OFF
										Left front
										element outer
CANCEL • SECURE			CANCEL • SECURE							element key
key and light
MET304 Cooktop Controls
			Electric Glide
ON/OFF keys			heat control					Residual heat
				keys				indicator lights
1	2	3	4	5	6	7	8	9	10
1	2	3	4	5	6	7	8	9	10
ON/OFF
1	2	3	4	5	6	7	8	9	10
ON/OFF
1	2	3	4	5	6	7	8	9	10
ON/OFF
1	2	3	4	5	6	7	8	9	10
ON/OFF
CANCEL • SECURE							Bridge			Left front
			CANCEL • SECURE				element			element outer
key and light								key		element key

METB365-1 Cooktop Controls

6