Dacor AG1424, GDG14, EG486 and ER48D manual Griddle Placement and Use

Griddle Placement and Use

Instructions

STEP 1: Before using the griddle for the first time, wash it in hot soapy water. Rinse it and allow it to dry thoroughly.

STEP 2: Make sure all burners are off and the cooktop or range is cool to the touch. Put the griddle over the top of the grates on the cooktop or range in the position shown. The grease trap goes toward the back. Fit the tabs that stick out of the bottom of the feet into the inside corners of the grate. When correctly installed, the griddle will rest securely about 1/2” above the top surface of the grate. It may rock back and forth slightly, which is normal.

STEP 3: Set one of the burners under the griddle to the light (high) position. Once lit, turn the knob to the MAX GRIDDLE position, or lower if desired. DO NOT keep the burner knobs higher than the MAX GRIDDLE setting after they are lit!

STEP 4: Repeat Step 3 for the other burner under the griddle.

STEP 5: During cooking be careful with metal utensils on the surface because they can scratch the non- stick coating. See back for cleaning instructions.

Cleaning the Griddle

After each use, wash the griddle thoroughly in hot soapy water to avoid stains from grease build-up. The griddle is coated with a non-stick coating for easy cleaning. Warm water and liquid detergent are all that are needed for cleaning. Remove stubborn spots with a non-abrasive plastic mesh pad. To prevent scratching, do not use abrasives or abrasive cleaners.

Grease trap toward back

Line up bottom of

griddle with top of grate

EG366 and EG486

Put over center burners

Page 2