Dacor GDG14, EG486 and ER48D, AG1424 manual ER30D and ER30G

Griddle Placement and Use

Grease trap toward back

Line up bottom of

griddle with top of grate

ER36D and ER48D

Put over center burners

Model ER36D shown. Size and style varies with model.

Grease trap toward back

CAUTION: For griddles used with model ER30G, the kit comes with two extra knobs

marked with the words “MAX GRIDDLE” that must be installed on the two right valve stems prior to griddle use:

1.Remove the two existing right knobs by grasping them and pulling straight back.

2.Put the new knobs with the words “MAX GRIDDLE” on the shafts. When installing them, align the “D-shaped” opening on the back of the knob with the end of the valve shaft. Carefully push the knob on until it stops. The old knobs may discarded.

Line up bottom of

griddle with top of grate

Model ER30D shown. Front panel style varies with model.

ER30D and ER30G

Put over right burners

Page 3