IF36 Panel Overlay Installation
Handle Dimensions and Installation
•Before installing a custom panel assembly, you must install the custom handle hardware.
•Dacor recommends handles with larger
•Any handle designed for use with an appliance should produce satisfactory results.
•Mounting screw length varies with the total thickness of the panels.
•On two door models: The top handle is mounted on the left or right side of the door depending on door swing.
IMPORTANT: Dacor advises not using single pull knobs.
Example of
Door Handle
20” Typical
(50.8 cm) 20" (508mm) 36” Max. (91.4 cm)
Detail “C”
Double sided tape between
doors and
panels
Detail “D” |
Three Door Model
Detail “D”
Detail “D” |
Two Door Model
Handle
| Handle | Door Panel |
|
| |
| Door Panel | Assembly |
Counter Sink | Assembly | Trim Frame |
| Surrounding Door | |
Screw |
| |
|
|
Door | Apply two strips of double sided | Door | |
|
| ||
| thin tape between door front and |
| Counter Sink |
| panel back on each side of door |
| Screw |
| handle |
|
|
Detail “C” | Detail “D” |
Side View - Handle Installation on | Side View - Handle Installation on |
Top Doors on three Door Model | All Other Doors |
|
|
| Page 4 |