IF36 Panel Overlay Installation
Panel Installation
NOTE: Remove the top door(s) to make panel installation easier. On three door models secure the inner edges of the overlays to the door where there are no trim frames using double sided tape.
• With a Phillips screwdriver, remove the trim screws from the top trim frame on the freezer and refrigerator door(s).
•Remove the trim.
•Lower the overlay panel into the trim frames on the door.
•With the panel in position, replace the top trim. Be sure that the panel is inserted completely into the channel for proper fit and alignment.
Freezer Door
(Bottom - both models)
Left door | Right door |
Three door models | Two door models |
Refrigerator Doors (Top)
Page 5
