Design Specifications

A

B

C D E

ANTI-TIP BLOCKNormal Installation StepsAnti-Tip BLOCK Installation Instructions

To reduce the risk of tipping of the drawer, the Anti-Tip block must be properly installed located 14 3/4" above the floor on which the Microwave In-A-Drawer™ will sit. The 6" Anti-Tip block must be provided by the installer. See Figures 2, 3 and 4. The Anti-Tip block prevents serious injury that might result from spilled hot liquids.

If the drawer is ever moved to a different location, the Anti- Tip block must also be moved and installed. When installed to the wall, make sure that the screws completely penetrate the dry wall and are secured in wood or metal so that the block is totally stable. When fastening, be sure that the screws do not penetrate electrical wiring or plumbing.

(6")

M

GF

H I

JK L

O

N M

P Q

R

Anti-Tip block

"

Figure 4

Figure 3

S

 

A. 84" wall cabinet

B. Optional wall oven cutout illustrated in sketch

C. Electrical outlet location

D.6"

E.Anti-Tip block

F.3 1/2"

G.5"

H.4"

I.2" minimum

J. 28 7/16" opening K. Allow 1/4" overlap

L. 14 3/4" to bottom of Anti-Tip block M. Allow 3/4" overlap

N. 23 1/2" minimum depth O. 15 3/16" ± 1/16" opening P. Allow 7/16" overlap

Q. Floor must support 100 lbs.

R. * 19" to top of floor (recommended) S. 30" cabinet minimum