Planning the Installation
Cabinet Cut-Out (continued)
Support Platform
warning
The top surface of the support platform must be installed flush with the cutout in the front of the cabinet or wall and any trim. Failure to install the platform properly may cause the exhaust vent to deform and/or become obstructed. An obstructed exhaust area may cause the oven to malfunction. See below.
Provide a platform within the cabinet to support the oven. A properly supported piece of 3/4” (19mm) thick plywood is recommended.
All contact surfaces between the appliance and the cabi- net, including the support platform, must be sturdy, straight and level. The oven cannot be leveled after it has been installed.
Oven Door
Cool Air Intake
(do not block)
Exhaust Deflector
(do not bend)
Support Platform
Deformed Sheet Metal 
Blocking Vent
Exhaust Vent do not block
Sheet Metal on
Bottom of Oven
RIGHT | Cabinet Front | WRONG | |
or Wall | |||
|
|
8
