11.Turn on the gas and check for leaks according to the Outdoor Grill Installation Instructions.

WARNING:

The grill cart is equipped with a grounded three-wire electrical system and ground fault interrupter (GFI) electrical outlets for safety. To avoid an electric shock hazard:

Connect the power cords from the outdoor grill, rotisserie motor and optional warming oven only to the electrical outlets mounted on the cart.

Do not under any circumstances:

-Cut or remove the third (ground) prong from the appliance(s) and rotisserie power cords.

-Do not use an adapter plug.

-Do not use an extension cord.

-Do not use a power cord that is frayed or damaged.

12.Connect a three-prong extension cord (minimum 5 Amp. capacity) to the power input on the back of the cart. Connect the extension cord to a grounded, three-prong, electrical outlet.

13.With the tank shelf open, connect the power cord from the outdoor grill and the warming oven (if equipped with one) to the electrical outlet on the back panel inside the cart.

14.Connect the rotisserie motor power cord to the electrical outlet on the back side of the cart.

Side shelf Installation:

1.Install the front mounting bracket for the right side shelf. Use two (2) of the provided button head fasteners and two (2) lock washers. Tighten into place using a 5/32” allen wrench.

Bracket

Lock

Washer Button Head

Fastener