Installation Instructions

Cabinet Installation

warning

To avoid an explosion hazard, do not connect the cart or appliance(s) to electrical power until after the gas supply system has been checked for leaks.

important

To prevent damage to the gas regulator, install the regulator only after the appliance is mounted in its permanent position in the enclosure.

•With at least one person on each side of the unit, lift it up and lower it into the cabinet cutout. As you lower it into the cutout slide the electrical cord into the utility cutout.

OBSB162

OB36 or

 

OBS36

Insert power cord into utility cutout

OB52 or

OBS52

Insert power cord into utility cutout

Cart Installation

warning

•Attach the appliance to the cart with all of the supplied bolts before use.

•All gas and electrical connections should be made after the grill is installed and bolted to the cart.

•To avoid an explosion hazard, do not connect the cart or appliance(s) to electrical power until after the gas supply system has been checked for leaks.

important

To prevent damage to the gas regulator, install the regulator only after the appliance is mounted in its permanent position on the cart.

1.Remove the cart from the shipping pallet before instal- lation. The Dacor cart ships assembled ready for installation of the outdoor grill. Set the cart in an open location and lock the wheels on the cart to minimize movement.

2.Remove the drawers.

3.With at least one person on each side, lift the appliance up and lower it onto the cart. As you lower it onto the cart slide the electrical cord into the utility cut-out.

36-Inch Cart Shown

Insert power cord into utility cutout

Utility cutout

Locking

 

Rotating wheel

 

 

wheel

Tank shelf

Locking wheel

 

 

4.Center the unit on the cart, making sure to line up the threaded mounting holes under the bottom of the grill with the holes in the top of the cart.

5.Thread all of the supplied bolts into the bottom of the outdoor grill from inside the cart. Tighten the bolts into place.

12