Installation Instructions

Connecting the Gas

Gas Connection - Natural Gas

note

•Units equipped for use with natural gas ship with a regulator assembly with 3/4” pipe attached and an additional 3/4” nipple.

•The regulator assembly is also equipped with a 3/4” to 1/2” reducer on the inlet side.

1.Connect the factory supplied regulator assembly to the gas inlet at the back right bottom corner of the appli- ance. Make sure the arrow on the regulator points in the direction of the gas flow (towards the grill).

2.Connect a 1/2” nipple to the regulator.

3.Install an approved flexible gas line from the regulator to the gas shut-off valve.

Natural Gas

Connection

Regulator assembly

(included PN 700597NG)

1/2” Nipple (not included)

Flexible gas line (not included)

3.Install an approved flexible gas line from the regulator to the gas shut-off valve.

Whole House LP

Gas Connection

Regulator assembly

(special order PN 700597LP)

1/2” Nipple (not included)

Flexible gas line (not included)

Gas Connection - LP Gas Cylinder Hose

1.Connect the supplied 3/4” coupling and nipple to the gas inlet at the back right bottom corner of the unit.

2.Connect the included LP cylinder hose to the nipple.

3/4” Coupling and nipple (included)

Connect

to outdoor grill

LP regulator and hose

 

assembly (included)

 

PN 72310 for OBSB162,

PN 101578 for

OB36 and OBS36

OB52 and OBS52

Gas Connection - Whole House LP Gas

1.

Connect the LP regulator assembly (special order from

 

 

Dacor) to the gas inlet at the back right bottom corner

 

 

of the appliance. Make sure the arrow on the regulator

 

 

points in the direction of the gas flow (towards the grill).

 

2.

Connect a 1/2” nipple to the regulator.

LP Cylinder Hose Connection

14