Dacor Cooktops 2/2, Clearances to Combustibles, PGM304-1, PGM365-1, 30”, 36”, 46”, Wide, Guide

PGM304-1, PGM365-1

Revised 06/24/08

30”, 36”, 46”	Wide,	PLANNING
Preference™ Gas	Cooktops 2/2	GUIDE

A

All tolerances +1/16” -0 (+1.6 mm, 0) unless otherwise noted.

13" Max.	18" Min.
(330 mm)
	(457 mm)

30" Min.

(762 mm)

3 1/8" Min.

(79 mm)

	1/4” (6 mm)
	Mimimum clearance
	to combustible
B	surfaces

Under Cabinet Clearances

(Front View)

	“B”
Model	Minimum
PGM304-1	29” (737 mm)
PGM365-1	35 1/4” (895 mm)

Clearances to Combustibles

Model

“A”“A” Minimum Recommended

PGM304-1	30” (762 mm)	36” (914 mm)
PGM365-1	36” (914 mm)	42” (1067 mm)

	Dedicated	Total		Approximate
	Circuit	Connected	Gas Supply	Shipping
Model No.	Required	Load	Requirements	Weight
			1/2” (13 mm)
PGM304-1			Regulator -	53 lbs.
	120 Vac,		Natural Gas
	60 Hz,	0.03 kW	Standard
	15 Amp	(0.25 Amp)	3/4” (19 mm)
PGM365-1	(Breaker)		Regulator -	67 lbs.
			Natural Gas
			Standard

NOTES:

1.Factory installed propane (LP) special ordered.

2.Cooktop is supplied with a 40” (1016 mm) power cord, with a three-prong grounded plug.

3.Utilities connections are located on the bottm of the chassis at the right rear corner of the cooktop.

4.See the Combination Installation (CI) section if installing with a downdraft, wall oven, or warming oven.

Web: http://www.Dacor.com	Specifications are subject to change without notice.	4.8
Corporate Phone: 800-793-0093	See installation instructions for additional details.