|
| Connections | and | |||
|
| ASSEMBLING | ||||
Before requesting service |
|
|
|
|
|
|
Mains supply | – The mains lead is not connected to the wall socket. | E | ||||
the televideo’s power indicator does not | – Condensation may have formed when moving the televideo |
| ||||
light your televideo doesn’t work | from a cold to a warm room. |
|
|
| ||
| Wait until the video reach room temperature. |
| ||||
| – Various safety devices have been triggered. |
| ||||
| > Switch off the main power supply and switch it on once |
| ||||
Recording | again, after waiting a few minutes. |
| ||||
– Is a cassette loaded? |
|
|
| |||
doesn’t start, the cassette starts playback |
|
|
| |||
or is ejected. | – Has the record tab been removed from the tape? |
| ||||
Play back | – Has tracking been adjusted? |
| > Adjust the tracking |
| ||
no colour in picture reproduction, on tape |
|
| ||||
playback | – Are the video heads dirty? |
| > Request professional service |
| ||
Snowy picture on tape playback |
|
| ||||
| – Are the video heads worn out? |
| ||||
| > Replace them. |
|
|
| ||
| – Is the tape old? |
|
|
| ||
The digits of the tape counter do not | – Is a |
| ||||
change, during tape playback. | > When a |
| ||||
| The tape counter does not advance. |
| ||||
A cassette won’t load. | – Is there a cassette already loaded? |
| ||||
The cassette won’t FF/REW,PB,REC | – The cassette is already fully wound back or to the end. |
| ||||
Timer is recording incorrectly | – Is the clock set correctly? |
|
|
| ||
A loud noise when left in Stop mode. | – If no play or record function is used for about 5minutes when |
| ||||
| left in Stop mode, the televideo switches its motor off to |
| ||||
| conserve the machanism. |
|
|
| ||
◆We strive to continuously improve our products - we therefore reserve the right to make technical changes without notice. The information contained in this booklet is therefore subject to change and is not legally binding.
17
