` v mac001 1200DPI 80LPI | |
|
|
Contents
- IMPORTANT SAFEGUARDS | 1 |
- SUPPLIED ACCESSORIES | 2 |
- FUNCTIONAL OVERVIEW | 3 |
Front | 3 |
Control panel | 4 |
Remote controller | 5 |
- PREPARATION | 6 |
Inserting Batteries into the Remote Control Unit | 6 |
Mains connection | 6 |
Aerial connection | 7 |
Connecting external equipment | 9 |
- INSTALLATION | 12 |
Language selection | 12 |
Automatic Tuning of TV Channels | 12 |
Programme Editing | 13 |
Manual Setup | 14 |
- DAILY USE | 16 |
Switching On and Off | 16 |
Status | 16 |
Programme Selection | 17 |
Picture Control | 17 |
Sound Control | 19 |
Special Features | 20 |
Sleep | 20 |
Still | 20 |
Hotel mode | 21 |
Teletext (Option) | 21 |
PC setup | 23 |
PIP (Picture in Picture) | 24 |
- TROUBLESHOOTING | 25 |
- WALL/ARM MOUNTING | 26 |
- PRODUCT SPECIFICATIONS | 27 |
Important
Safeguards
Location
Heat, Moisture, Dust, Vibration
Position your set so that bright light or sunlight doesn't fall directly onto the screen.
Care should be taken not to expose the set to any unnecessary vibration, moisture, dust or heat. Do not expose the set to dripping or splashing.
Ventilation
Also ensure that the set is placed in a position to allow a free flow of air.
Do not cover the ventilation openings on the back cover.
Leave at least 10 cm around each side of the TV set.
Mounting
This set can be positioned by using the table top stand or wall mounting bracket. When you install the set using the wall mounting bracket, fix it carefully so it is secure.
Object Entry
Do not insert foreign objects, such as needles and coins, into the ventilation openings.
Lightning striking
You should disconnect your set from the mains and the aerial system during thunderstorms.
Cleaning
Unplug the set from the mains before cleaning.
Dust the set by wiping the LCD screen and the cabinet with a soft, clean cloth. If the screen requires additional cleaning, use a clean, damp cloth.
Do not use liquid cleaners or aerosol cleaners.
Do not rub or strike the LCD with anything hard as this may scratch, or damage the LCD permanently.
Service
Never remove the back cover of the set as this can expose you to high voltage and other hazards. If the set does not operate properly,unplug it and call your dealer.
ENGLISH
1
