Daewoo DSL-15D1T, DSL-17W1T Aerial Connection , Inserting Batteries into the Remote Control Unit , Mains Connection

ENGLISH
Preparation
7
Preparation
6
Aerial Connection
CONNECTING THE TV DIRECTLY TO AN AERIAL
Connect an aerial cable (75 ohm coaxial cable) to the Aerial terminalon the back of the TV set.
Aerial
cable
Aerial
Terminal
Aerial
Power outlet
AC Cord
AC Adapter
DC 12V input terminal
Inserting Batteries into the Remote Control Unit
To load the batteries, turn the remote control handset
over and open the battery compartment.
Insert the batteries (Not supplied, two 1.5v, type R03 or
AAA).
Make sure that the polarity matches with the (+) and (-)
marks inside of the battery compartment.
Note: To avoid damage from possible battery leakage,
remove the batteries if you do not plan to use the
remote control handset for an extended period of
time.
Mains Connection
1. Connect the DC plug of the AC adaptor to the DC 12Vinput terminal of the set.
2. Connect the AC adaptor and AC cord.
3. Plug the other end of AC cord into a Power outlet with 100V - 240V AC, 50/60Hz.
DSL-15D1T PAL(‡» ˙ )GB 03.11.27 5:23 PM ˘ ` 6 mac001 1200DPI 80LPI