Daewoo DTQ-29U1SC/SSP, DTQ-29U5SC/SSP service manual Assembly Adjustments

ALIGNMENT INSTRUCTION

2.ASSEMBLY ADJUSTMENTS

1)SCREEN ADJUSTMENT (S2)

•Enter the service mode and select service adjustment S2.

•You can see the one horizontal line on the screen.

•Adjust the Screen Control Volume (located on FBT) so that the horizontal line onscreen may be disappeared.

•Press the volume up or down button to exit in the screen adjustment mode.

CAUTION

IN THE SCREEN ADJUSTMENT MODE, DONT PRESS OTHER BUTTONS EXCEPT VOLUME UP OR DOWN BUTTON.

2)FOCUS ADJUSTMENT

•Turn in a local station and adjust the Focus Control knob (located on FBT) for best picture details at high light condition.

3)GEOMETRIC ADJUSTMENTS (S6)

•Select service adjustment S6

•You can see the OSD as shown in below.

V-SIZE	379￿	TILT	504
V-POSI	1168￿	P-PARA	549￿
H-PHASE	36￿	H-SYM	984￿
H-SIZE	1060￿	H-COR	984￿
V-LIN	269￿	HBSO	358
V-S	237￿
HBST	260

3-1. Horizontal Position Adjustment

•Select H-PHASE item, adjust H-PHASE data value to obtain proper horizontal centering of the internal cross pattern at the left and right of the screen.

3-2. Vertical Position Adjustment

• Select V-POSI item, adjust V-POSI data value to center the raster properly on the screen.

-10-