Daewoo DVQ 14H1FC instruction manual Using the Counter Zero Stop

Using the Counter (Zero Stop)

The VCR counter can be used to keep track of your position on the tape. You can also use it to quickly return to a particular point on the tape. The counter cannot be displayed unless there is a cassette tape in the TV/VCR.

1.To display the counter, press the RECALL button until the counter is displayed in the right hand corner.

2.To reset the counter, press the C-RESET button on the remote control (0:00:00). The counter is also reset when you put a new cassette in your TV/VCR.

3.Press the MENU button until “Tape” menu will be displayed.

4.After play the tape, use the xCHybuttons to select the “Zero stop”. If the press the VOLB button, you can quickly return to the 0:00:00.

5.The TV/VCR will rewind until it reaches the 0:00:00 mark on the counter, then it will stop. You can cancel the search for 0:00:00 by press the STOP button.

6.Press the C-oSTOP button on the remote control, you can quickly return to the 0:00:00.

Chapter 4 : Operating Your VCR 23