C H A P T E R
3
Operating Your TV
Once you have connected your TV/VCR to an antenna or cable system, plugged the TV in, and put batteries in the remote, you are ready to use the TV. The first thing you should do is program your TV/VCR so it memorizes all of available channels.
Turning Your TV/VCR On
RECALLPOWER
C H
MENU
VOLVOL
C H
1 2 3
1.To turn your TV/VCR on, press the POWER button on the remote control. You can also use the POWER button on the front panel. Make sure your TV is plugged in before you try to turn it on.
4 5 6
7 8 9
SLEED 0 ATK SLOW
REW PLAY FF
REC/OTR STOP PAUSE/STILL
VISSVISS
Programming Your TV/VCR's Channel Memory
Your TV/VCR's memory determines the channels that are available using the xCHy but- tons. If a channel is not in memory, you can tune to it with the number buttons, but not with the xCHy buttons. Follow these steps to program your TV/VCR's memory:
1.With the TV on, press the MENU button until
2.Use the xCHy buttons to select “Reception”, then use the VOLB button to select ‘Air’ or ‘Cable’. If you connected an antenna to your TV/VCR, select ‘Air’; If you connected a cable system, select ‘Cable’.
3.Use the xCHy buttons to select “Memorize Channels”, then use the VOLB button to enter the “Memorize Channels” process.
4.Press the MENU button to return to
5.Press the MENU button to return to normal TV viewing.
Your TV/VCR's channel memory will not be affected by a power outage. You will not need to
1 |
|
|
|
| |
Language : |
| English |
Reception : |
| Air |
Memorize Channels |
| |
Add/Delete Channels |
| |
Select | Adjust | Exit |
2 |
|
|
|
| |
Language : |
| English |
Reception : |
| Air |
Memorize Channels |
| |
Add/Delete Channels |
| |
Select | Adjust | Exit |
4 |
|
|
Language :English
Reception :Air
Memorize Channels
Add/Delete Channels
|
| |
|
| |
Language : |
| English |
Reception : |
| Air |
Memorize Channels |
| |
Add/Delete Channels |
| |
Select | Enter | Exit |
5 |
|
|
Select | Enter | Exit |
Chapter 3 : Operating Your TV 13
