C H A P T E R
1
Overview of Your Equipment
Your TV/VCR’s comes with a remote control. The section below summarizes the buttons, controls, and terminals that will use with your TV/VCR’s.
Your TV/VCR's Front Panel
Below you will find short description of the buttons and indicators on the front panel. These are use following functions.
1VIDEO in jack
Use this jack to receive a video signal from another A/V component.
2AUDIO in jack
Use this jack to receive a audio signal from another A/V component.
3EAR PHONE jack
Use this jack to the earphone (not supplied). The sound from the speaker is turned off.
4yCHx buttons (channel)
Press these buttons to change channels on your TV/VCR. You will also use these buttons to adjust the tracking.
5 CVOLB buttons (volume)
Press these buttons to change your TV/VCR’s volume.
6Remote control receiver
This receiver receives a signal from your remote control. Do not block it.
7
This indicator light up when the power is off.
8REC/T.REC (red/green) indicator
This indicator light up red when recording and light up green when timer program operat- ing.
9REC button
Press this button to begin recording. Press repeatedly to set a recoding time using
10REW button
Press this button to rewind the tape.
4Chapter 1 : Overview of Your Equipment
