Cleaning the Lint Filter
!Pull the Filter frame up- ward.
@Turn the lint filter inside out, wash to the lint off with water
Lint Filter | Filter Frame |
#Return the filter as it was, and insert the filter frame into the slot
Cleaning the water inlet filter
•Clean the filter when water leaks from, the water inlet.
!Pull the power plug out before cleaning it.
@Turn off the water supply to the washer and
sperate the inlet hose.
#Pull the inlet filter out.
$Remove the dirt from the inlet filter with a brush.
Cleaning the drain filter
•In case “U” shape drain hose, this filter’s equipped at the cack side of washer.
•This drain filter is to screen the foreign stuffs such as threads, coins, pins, buttons etc ...
•If the drain filter is not cleaned at proper time (every 10 times of use), Drain problem could be caused. see page
! Put down the remained | @ Turn the cap counter | # Pull out the filter | |
water in the hose. And put | clockwise. |
| assembly off the case of |
a container under the filter |
|
| the main body. |
to collect water. |
|
| FILTER |
|
|
| |
|
|
| CASE |
|
| CAP |
|
FILTER CONTAINER |
|
| CAP |
|
|
| |
$ Clean the drain filter | % Put in the filter along the | ^ Turn the cap clockwise | |
removing the foreign | guiding prominence of the | tightly. | |
stuffs. | case. Please note the left |
| |
| position of the filter |
| |
| adjusting the groove to the |
| |
CAP | guide rib. | CASE |
|
|
| ||
| FILTER | GUIDE | CAP |
| RIB | ||
| CAP |
|
|
|
| SUIT |
|
16