SAFETY PRECAUTIONS
CAUTION: No modifications of any circuits should be attempted. Service work should be performed only after you are thoroughly familiar with all of the following safety checks and servicing guidelines.
◆Safety Check
Care should be taken while servicing the inverter that generates the high voltage to lighten CCFL of the LCD panel.
◆Fire & Shock Hazard
•Insert an isolation transformer between the analog color display and AC power line before servicing the chassis.
•When servicing, pay close attention to the original lead dress especially in the high voltage circuit area; if a short circuit is found, replace all parts which have been overheated as a result of the short circuit.
•All the protective devices must be reinstalled per original design.
•Soldering must be inspected for possible cold solder points, frayed leads, damaged insulation, solder splashes or sharp solder points. Be certain to remove all foreign materials.
1
