4.The channel 1 relay and the 12 VDC output can be set to operate for
4seconds or 10 minutes. To change the duration, locate the jumper (8) on the upper right hand corner of the circuit board. When the jumper is covering both pins, the output time is 4 seconds.When the jumper is only covering one pin, the output time will be 10 minutes.
NOTE: Whenever a change is made to the time jumper or the dip switches, the receiver must be turned“OFF”and then back“ON”to operate properly.
For maximum range between the transmitter and receiver, the receiver should be mounted horizontally on a wall and as high off the floor as pos- sible. Although the maximum range is about 3000 feet, things such as hills, trees, metal siding and stucco can all reduce the range.
Frequency: 433.92 MHz
Operating voltage: 12VDC
12 volt DC output current: 400 mA maximum
Relay output rating: 24VDC at 3 Amp
6.
TECHNICAL SUPPORT
If you encounter any difficulty in the operation of this product after reading the manual, please contact us. You can reach us by phone at
WARRANTY
Dakota Alert warrants this product to be free of defects in material and work- manship for a period of one year from the date of purchase. This warranty does not cover damage resulting from accident, abuse, act of God or improp- er operation.
If this product does become defective, simply return it to Dakota Alert. Please include a note describing the troubles along with your name and return ad- dress as well as the original sales receipt. If the product is covered under war- ranty it will be repaired or replaced at no charge. If it is not covered by war- ranty, you will be notified of any charges before work is done.
7.
