IMPORTANT NOTE!
This gauge has an hour meter and odometer preset option available only for the first 1.0 engine hour and 10 miles (16km). See “ODO/HR PRESET” for instructions.
Operation menu
UTV-1200
Multi Gauge for
2008 Yamaha Rhino
Left switch functions
Pressing the left switch during normal gauge operation will move through the below commonly viewed functions for convenience.
00000.0 | Odometer | |
12:00A | Clock (hold left switch to set) | |
|
| Setting clock: |
|
| Left switch press moves between hours and minutes |
|
| Right switch press changes current value |
|
| Hold left switch again to exit clock set mode |
H | 0.0 | Hourmeter |
Right switch functions
Pressing the right function switch during normal operation will scroll through the following display functions. A heading will first appear after each press to display the currently selected function. After about 2 seconds, the display will show the data for the selected function.
Heading | Data |
| Description |
|
TRIP A | A | 0.0 | Trip A (hold right switch to reset) |
|
TRIP B | B | 0.0 | Trip B (hold right switch to reset) |
|
SRV MI(SRV KM) | S 0000 | Count down Service odometer if enabled (hold right switch to reset) | ||
SRV HR | SH 000 | Count down service hour meter if enabled (hold right switch to reset) | ||
MPH(KPH) | 00 MPH(00 KPH) | Alternate speed display (hold right switch to change primary unit) | ||
TACH | R 0000 | Tachometer displays in information center |
| |
|
|
| page 1 | MAN#650244:A |
