SHOCK ELECTRIC OF RISK OPEN NOT DO

 

 

16

SAFETY

CAUTION

 

Concept Interest

 

 

 

 

 

 

 

 

 

CAUTION:

TO REDUCE THE RISK OF ELRCTRIC SHOCK, DO NOT REMOVE THE BACK PANEL. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.

The lightning flash within an equilateral triangle is intended to alert you to the presence of uninsulated „dangerous voltage“ within the product’s enclosure that may be of sufficient magnitude to constitute an electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

1.Read Instructions - All the safety and operating instructions should be read before the appliance is operated.

2.Retain Instructions - The safety and operating instructions should be retained for future reference.

3.Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to.

4.Follow Instructions - All operating and use instructions should be followed.

5.Water and Moisture - The appliance should not be used near water - for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool and the like.

6.Carts and Stands - The appliance should be used only with a cart or stand if recommended by the manufacturer.

7.Wall or Ceiling Mounting - The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer.

8.Ventilation - The appliance should be situated so that its location or position does not interfere with proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or placed in a built-in installation, such as a bookcase or cabinet, that mayimpede the flow of air through the ventilation openings.

9.Heat - The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances that produce heat.

10.Power Sources - The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance.

11.Power Cord Protection - Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed on or against them, paying particular attention to cords at plugs, convenience receptacles and the point where they exit from appliance.

12.Cleaning - Do not use any liquid cleaners. Use only a dry cloth to wipe off dust and grease.

13.Non-use Periods - The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time.

14.Object and Liguid Entry - Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings.

15.Damage Requiring Service - The appliance should be serviced by qualified personnel when:

a.The power-supply cord or the plug has been damaged; or

b.Objects have fallen, or liquid has been spilled into the appliance; or

c.The appliance has been exposed to rain; or

d.The appliance does not appear to operate normally, or exhibits a marked change in performance; or

e.The appliance has been dropped, or the enclosure damaged.

16.Servicing - The user should not attempt to service the appliance beyond that described in the operating instructions. All other servicing should be referred to qualified service personnel.